Frbiz Site
"51" small Holiday Just ended, Zijia You return the vehicle maintenance corny, but a kind of Tire Maintenance of way??? "Rotation", you know? Just listen to extraordinary requires rotation, heard tires also need to "rotation", in fact, tire maintenance is a trick, which can be a lot of learning. Related Reading: Expert teaching to protect your car tires nitrogen
Clever "rotation" to prevent partial wear used stump grinder
home wood chipper
"Last year I bought a car, and now opened more than 10,000 km, '51' Zijia You come home and find the front tire than the rear tires Wear and tear To a large extent, I should change the tire it? "Yesterday, the reporter received a phone call asking readers to Ms. Lee.
After investigation, reporters found that many owners have indeed experienced similar problems, their first thought was for tires, which tire a few owners that if a problem, replaced or re-replacement of spare tire on it. There are owners of the concept proposed by tire transposition, but any time the number of kilometers to the transposition is not clear.
Liaoning Prime Ante Ford cars 4S shop Technical Director Xu, Zhigang told the press, and now, most cars are front engine type precursor to a larger front load, but also responsible for steering and other controls, resulting in severe wear of the front than the rear. In addition, as hanging around the axis orientation angles, so that the location of tire wear and wear are also different. Eccentric wear of the tire will go on like this much more serious, not only reduces the tire's life, there is a big security risk. Therefore, to extend the life of the tire wear and eliminate the bias arising from potential safety problems, need to make tires on a regular basis transposition "rotation" so as to ensure that the work intensity of each tire can achieve balance and reasonable transposition could tire extend the service life of 20%.
Spare no maturity have to "scrap"
Since we know that a regular "rotation" can extend tire life, but what should be the methods and frequency of transposition to the tire then?
"Transposition is not just a tire change, it is a science." According to insiders, the tire transposition follow "vehicle manuals" in tune car tire manufacturers recommend that if the company did not specifically adjust tire be prescribed period, usually front-wheel drive vehicles should be done every 8,000 km driving transposition, and four-wheel drive vehicle is necessary in every 6,000 km when the conversion. However, if more than 20,000 km are not transposed, tire wear has been formed, the proposed tire is not transposed, and in order to avoid the phenomenon of deviation. Liu, director of the reporters about the specific "changing of the guard" mode. In general, the front wheel and rear wheel drive vehicles are the cross-transposition or a direct swap with the front and rear. Single-oriented methods of repositioning the tire is different from this, the only straight swap front and rear wheel can not be so cross.
In addition, Liu Director reminded the owners that if the spare tire in the size and structure of the normal use of tires with the same car, the most scientific, most reasonable way is to cross-conversion, together with spare change, so that a car running 5 ~ 100,000 km, the five tires (including spare tire) wear is very even, can be directly replaced, do not waste spare tire, because tires also have shelf life, generally about 5 years at the factory, if the equipment child up for a long time will be wasted without.
Tires do a balancing test after transposition Transposition and transposition when
after tire should pay attention to the problem? Kia Motors and 4S stores with the sale of Liaoning Service Manager Wang Ziwei reminded car owners, car tire conversion must take note of the "four with", that is the same plant-type tires, size, pattern, size (carcass cord layers, allowing inflation pressure and load capacity). That is, if the vehicle due to Puncture Other factors such as replacement of only the individual tire plant type or pattern, and some owners use a little change in size spare tire, then the tire can not simply be transposed, only plant type, size, pattern, size 4 are the same tire case before conversion, or will result in deviation and so on.
Manager Wang introduced tire transposition should pay attention to tire due to leaks mended or installed in the spare tire as do non-driving wheel used to ensure that the situation the best tires installed on the driving wheel, in order to avoid tire failure led to the direction of out of control .
In addition, the "rotation", the best to do a balancing and wheel alignment. Manager Wang introduced tire transposition is also necessary for dynamic balance test, if the wheels on both sides of the uneven weight can lead to vehicle traffic, the steering wheel shaking, Car body Instability. So usually, tire transposition and dynamic balance are simultaneously. There is also the first tire rotation is very important, do not forget that after each rotation of the vehicle manufacturer's recommended tire pressure adjustment.
Tuesday, September 7, 2010
Tire Rotation Needed Maintenance Tips
Start The Eu's Largest Technical Barriers To Trade
REACH closely guarded REACH Inspection and Quarantine of China Centre for Settlement of R & D, said Minister of Meiling smiled, REACH regulation incorporates the past more than 40 laws and regulations, is the largest EU legal system, in addition to laws and regulations are outside the original 22 Rules . "Texts 849, while the implementation details, the light will have a software description of more than 2,000 pages!" eclipse car speakers
car audio tweeter
REACH legislation on the EU market and access to the EU market, mandatory registration of all chemicals, assessment and licensing and implementation of safety monitoring. More stringent, it's principle is "a chemical substance, if not yet proved dangerous before it is unsafe", which is similar to "presumption of guilt" approach, involving more than 30,000 kinds of chemicals, put on a magic spell to them. According to the China National Metals and Minerals
chemical into Export Chamber of Commerce statistics, in 2006 China's import and export of petroleum and chemicals amounted to 245.73 billion U.S. dollars, of which trade with the EU to 20.819 billion U.S. dollars, accounting for nearly 10%. This year China-EU trade accounted for about 10%.
Therefore, REACH regulations impact on Chinese companies is quite substantial, it is estimated that each chemical test, where appropriate, cost about 85,000 euros, a new material for each test cost about 570,000 euros . Chinese enterprises the burden of annual cost for its 500 million-1 billion U.S. dollars.
According to the forecast, REACH regulations will cost our products exports to the EU increased by about 5% of the cost of the product imported into the EU increased by about 6% of the EU chemical imports and exports will decline by 10% of total chemical production in China value will drop by 0.4%.
Moreover, REACH regulations not only for chemical substances, and contains all the chemical products will be used to commodities, so the appliance, textile, Shoes , Toys, electronics, automotive and pharmaceutical areas will be involved. Related products manufacturing enterprises need to use a variety of chemical substances notification.
2007 6 1st, 6-year brewing REACH regulations come into effect. June 1, 2008, is responsible for the implementation of the management regulations of the European Chemicals Agency (ECHA) opened in Helsinki, Finland, REACH pre-register for free access to the basic stage.
Pre-registration period to end on November 30 the same year, enterprises in this period the production of chemical substances on the pre-registered, according to chemical properties and yield of available 3 years, 6 years or 11 years Registration of the transition period, and during the transition period in the normal exports to the EU. This completed the formal registration of assessment for the enterprise won the time, sharing the cost.
Concern to the industry is gradually warming up
6 1 Helsinki time, 4:18, Inspection and Quarantine of China Centre for Settlement of Quzhou Hengshun REACH Chemical Co., Ltd. to be responsible for REACH pre-registration REACH-IT web-based system presented on the chemical dichloro-pyridine the world's first pre-registration dossier. And this center was presented 75 kinds of chemical pre-registration files, most are are "world debut."
Dichloropyridine shampoo is a shampoo for the production of active ingredients of chemical raw materials, and Handsome is the world's leading producer of dichloro-pyridine, for a number of world-renowned cosmetic manufacturers supply. Handsome company staff Yang Wei told reporters that the company knew of the REACH legislation two years ago, sent last year to participate in the training of relevant organizations. "If you do not pre-register in time, we access the European market, the door was sealed up."
Zhejiang Sanyuan Holding Company is the leading textile companies, such companies are also big users of chemicals. Dr. Wang Wei, vice president, said the company an average of a product should be informed with 50 kinds of chemicals. "Currently our database has been completed, we are still on the ecological textile products in Europe Okeo-Tex certified, certified to better cope with REACH regulations."
The domestic petrochemical giant Sinopec was also closely REACH. Sinopec deal with the EU REACH regulation office, senior Facts from recently in Hangzhou to attend the 14th China International Chemical Fiber Conference, disclosed that Sinopec has completed all preparations for pre-registration, and pay close attention to laws and regulations and related guidelines update.
Technical equipment and start Zhejiang Economic and Trade Commission Deputy Director Li Jingning introduced that guide the enterprise in Zhejiang Province authorities have two ways to deal with REACH regulations, SMEs, mainly through the State Administration of Quality Supervision, based in Hangzhou, China REACH Inspection and Quarantine Centre for Settlement of the national technology platform, and as ternary holding such a large construction company is an independent technology platform independent.
Monday, September 6, 2010
First Three Quarters Of Automotive Electronics Market, Both Domestic And Export Rosy
Frbiz Site
Automotive electronics is a combination of semiconductors and automotive electronic systems as an important part of the car, more by car manufacturers and consumers attention. It is mainly divided into two categories: one category is automotive electronic control devices, such as electronic fuel injection systems, anti-lock brake control, anti-skid control, suspension control, power steering, etc.; the other is-board automotive electronics devices, including the navigation, entertainment systems and vehicle communication systems. It is reported that the cost of electronic systems has been the total cost of the vehicle accounted for 22%, is expected in 2010, this figure will reach 40%.
1, 2009 1-8 month of the domestic automobile electrical and electronic products exports all the way up binoculars coin operated
homemade telescope
The rapid development of the global automotive industry, as well as consumers and car manufacturers the high demand for automotive products for the automotive electrical and electronic products and components provide a wide range of applications markets, and make it as China's auto industry went into a period of rapid development of . Despite the financial crisis in 2009 under the influence of domestic exports of auto parts in major cities there are different degrees of decline in volume, but the K-Swiss car Netcom China Association of Automobile Manufacturers released over the data collation and analysis found that in January 2009 -8 months , the domestic automotive electrical and electronic parts and components exports increased from February onwards all the way up, growth was evident. As shown below. Major exporting countries to the United States, Germany, Japan, South Korea, the Netherlands, Italy and so on.
Correspondingly, according to the world's leading professional auto parts e-commerce platform - K-Swiss automotive network statistics show that in 2009 from February to September, the International K-Swiss car buyers through the network of automotive electrical and electronic products sourcing Jun Cheng emerged in a significant rise. Among them, popular purchase products mainly include sensors, generator / starter, switches, air-conditioning compressors, batteries, etc., with an average purchase frequency per month, respectively 120,100,82,68,54 above. Compared with February, in September the procurement of products popular purchases each contributed 2-3 times the growth rate.
International Automotive electrical and electronic products in China is expected to purchase the size of the last quarter of this year to further expand, it is learned, the largest country in an international automotive electrical and electronic procurement will soon be held in Shanghai at the end of the same period, organized automotive electronics intelligent, integrated application technology seminars, the event brought together more than 50 internationally renowned supplier of OEM and 12 address such forums, including the United States Afeiniya Corporation, MTU, Hudson Group and other bulk purchases on site, many of them top international car giant, procurement amounting to approximately more than 70 kinds of species, total purchases of more than 10 million U.S. dollars.
Second, the domestic market for electrical and electronic products matching the demand for a huge
With the introduction of the revitalization of the domestic auto industry implementation of the plan and related supporting policies to continue to release, China's automobile industry developed rapidly in 2009. According to China Association of Automobile Manufacturers statistics, in August 2009, China's automobile production and sales of the respective 1.1407 million and 1.1385 million, the chain growth of 2.62%, respectively, and 4.71%, respectively, year on year growth rate reached 86.10% and 81.68%, for 6 months to achieve 1 million sales level, the whole Chinese auto industry was the explosive development momentum. This also brings the domestic automotive market electrical and electronic products, blow-style needs.
In the past half year, domestic car production surging, demand for automotive electrical and electronic components is relatively deficient in some of the domestic OEMs and 12 suppliers are beginning to search for matches by K-Swiss automotive networks of electronic appliances suppliers, organized by the number of games to buy K-Swiss meet at the home, domestic electrical and electronic procurement ratio of about 2 as about its own brand models, in which more than accounted for Qi Cheng.
In the next few years, China's automotive electronics, a huge room for development at home and abroad. In other countries, developed countries, automotive electronics products have accounted for the cost of high-end luxury sedan vehicle more than 50% of China's middle and low products have greater price competitiveness of export obvious advantages. In China, along with the steady development of the automotive industry, OEMs are increasingly turning to car entertainment systems into complete production system is expected in 2009 China's automobile electronics industry is expected to reach 1,484.3 billion yuan, in 2012 more than 3,200 billion, in which automobile accessory market will play a pivotal role.
In addition, consumers more and more emphasis on vehicle safety, stability, comfort, entertainment, auxiliary and energy savings of the huge market demand for China's automotive electronics industry development has brought an opportunity. However, the domestic auto electronics enterprises should continue to strengthen independent innovation and enhance their own R & D capabilities, improve the added value of automotive electronic products to domestic and foreign markets more competitive. Now, with increased investment in automotive entertainment systems, a large number of the original main international after-market, the leading electronic suppliers have successfully entered the domestic automobile accessory systems, these enterprises without exception in the autonomous research and development has achieved a remarkable success, technology clear lead, thus supporting the market to grab a "first taste of soup;.
Dongyang Specialty Mat
Dongyang, Zhejiang, one of the three major production bases straw mat. Straw mat, a long history of production, quantities of better. metal curtain rods
curtain rod set
Dongyang Grass kinds of silk began in the early Qing Dynasty, dating back 260 years of history has been.
Alpine Rush (soil names Rattus) is one of Cyperaceae, Ye was tubular, there are 1.67 meters long or more. Planting Alpine Rush by sub-roots approach, namely, to take the first sub-Bai Cheng Po left a number of kinds of Cong, by planting method was equidistant straight mold insert Daejeon. Grass filament main product is the mat work, followed by straw hat, pillow mat, and sofa chair cushion. Introduction Alpine Rush, the annual output of mat about 8 million copies. At the same time with the short grass made of straw hats, but also sold to neighboring districts.
Mato anti-Army, Shacheng head, Hui Siu-tong, River West, stone homes Tong, Guan Qiao, Bota radius of dozens of villages, the old liberated areas of grass silk production. Qianxiang in 1975, triple, MA house three towns in 1981 Huangtian trafficking, Hongtang, Wang Tau Hom, South Stream and other four towns are also developing grass silk production. Year of the history of the individual leather seats along with an area of over mu-screen rock, south on the lake, Youth, Xu Township house and so on.
Grass wire of different length, use different. A long woven straw mat, a short in the 60's and early 70s utilization were woven into hats, pillows cushion chair seats and sofas.
The preparation of a straw mat, straw mat, a traditional tool rack, buttons wood, three kinds of winches. Usually made with pine straw mat frame, the shape of "Well", which a high degree of 1.3 to 1.5 meters, which support the mat warp. Buttons with a solid smooth ebony wood made in the middle by 2.5 cm equidistant drilling slot, mats warp intervals from each hole and through the slot, so that when you insert the weft woven straw mat system can be cross-ram tight. Winch was the foot of textile warp spinning wheel. After scraping before weaving hemp, Breaking hemp, spinning line, the whole grass, grass pants off, behind a series of warp preparation. They need to tie in with traditional weaving method, one-tim grass, one person seat. After the woven straw mat after trimming, drying row of seats and seat three processes.
In past, Dongyang Scirpus grass mats to raw materials, method of weaving seats are available on its latitude and longitude Scirpus grass, woven into the shape Ruanxi Ye grumble, manufacturing, complicated procedures. After the introduction of Alpine Rush woven hemp through seats, but the warp less Ximian loose.
Since 1960, planted the grass seed in Ningbo thin, warp density is also changed by the thin buckle buckle, the width of 118.8 centimeters (36 inches) of the mat, warp from 92 to 108, farmers have also increased a row of seats process, significantly improve the quality of straw mat, the standard of quality seats to catch up with Ningbo seats. In recent years, the system of travel seats and pillows seats are "line through the" seats, is quoted Japan's weave seats and replaced silk grass cloth seam crimping the edge, enabling the machine knitting, fashion beautiful light.
Shanghai, China's Largest "nylon Film" Production Base
Frbiz Site
China's largest production base of nylon film --- Purple East Chemical Materials Co., Ltd. Shanghai recently set up in Shanghai. Japan and Japan as an investor spinning Shanghai Zijiang Enterprise Group Co., Ltd. and Shanghai Group Co., Ltd. in Shanghai recently held a grand signing ceremony of the joint venture agreement. natural casings
stuffed beef tenderloin
As a production of five flexible packaging substrate (bopa, bopet, bopp, cpp, pe) of the first nylon film, produced by the world recognized as the most difficult and complex packaging materials should never be short of the current in the domestic market needs to import large quantities.
TOYO Corporation is the world's spinning the field of packaging substrates, one of the most famous, with world-class technology, research and development, equipment manufacturing capabilities and high-end products.
In China, the largest and most comprehensive product range of packaging types listed companies - Shanghai Shanghai Zijiang Enterprise Group Company Limited since its inception, has always been concerned about, research and development of the concept of urban green packaging, new materials, the film substrate production, beverage packaging, paper and plastic packaging, plastic flexible packaging, label production, crown cap production, printing ink production areas such as the formation of its own unique advantages, a number of products remains the largest Chinese industry first, over the years with the Coca-Cola, Pepsi, Danone, Kirin , unity, Johnson & Johnson, Kao, Nestle, Unilever, DuPont and other famous enterprises to establish a close cooperative relationship.
Strong-strong alliance established in Shanghai Chemical Materials Co., Ltd. Zidong targeting the domestic gap in this area, in line with a high starting point, high-quality, professional, first-class purposes, the introduction of Toyobo patented technology to produce a new type of packaging Materials --- a two-way stretch nylon membrane, the product will completely change the domestic market are not high-grade nylon membrane, the output is not the situation and enhance China's nylon film production and application level, at the same time satisfy and stimulate domestic demand for high-quality packaging materials .
Is located in Minhang District, Shanghai Zi Jiang Industrial Park of Shanghai Chemical Materials Co., Ltd. Zidong The total investment will reach 100 million U.S. dollars, the registered capital of 50 million U.S. dollars for an initial registered capital of 20 million U.S. dollars, planning will be built four nylon film production line, built in China the largest production base of nylon film and eventually achieve an annual output of 22,000 tons of nylon film production capacity, the introduction of the first phase of the design supporting the formation of Toyobo nylon film production line, scheduled for the end of the third quarter of next year out of film production, the production line technological content and capacity, priority is the same type of equipment, and on this basis, according to market development, and gradually complete the master plan for construction.
Shanghai Zijiang Enterprise Group, general manager of the Group of thin-film substrates Division Mr TSUI soon as Shanghai Chemical Materials Co., Ltd., chairman of Zidong, in his view, the building of our own production base of high-level nylon film was his desire for many years, five years ago, has been concerned about the China nylon membrane movements, the joint venture, is round the hearts of his dream.
The project is Zijiang Group, the largest since the establishment of investment projects, Toyobo Co., Ltd. is Japan's first overseas investment, business entities, long way to go, but the prospects are extremely bright, he will give full play to both sides with all staff in technology, equipment, personnel, and other areas to promote and enhance the company's packaging film substrates in China's industry market share and visibility.
Qimen Electrical And Electronic Industry Cluster Effect Has Been Highlighting
Frbiz Site
Qimen County to develop electrical and electronic industries and continue to extend the industrial chain, to enhance the level of corporate technological innovation. At present, the electrical and electronic industry has become the county's economic development a major "engine."
Walt Qimen County Electric Company is a manufacturer of hairdressing products, export-oriented enterprises. Company official told this writer, and now they produce the export products, there are many electronic components manufactured by local enterprises. However, a few years ago, their products also need electronic components manufacturers, which rely on imported supplies. outdoor gas burners
bbq grill brush
Electronics is the Qimen County, a traditional industry, in previous years, the county several big private electrical and electronic companies are "going it alone" business is small, the cluster effect was not obvious and so severely constrained the development of the industry, electrical and electronic industry, "the mountains without peak" into the reality of a Qimen County decision makers, "the pain of my heart." In order to enlarge and strengthen the traditional industries, improve the industry concentration effect, Qimen County after full investigation and market analysis, determined to expand electrical and electronic industry cluster as the core, in order to extend the industrial chain focusing on the development of road, through the introduced to develop a set of preferential policies to support and nurture local enterprises.
At the same time, to attract foreign investors to pay attention to the introduction of the industries associated with a strong initiative to better optimize the integration of electrical and electronic industry resources to enhance the gathering effect of electrical and electronic industry. Huangshan Electric and a number of prominent main business, industrial linkage and competitive, bring obvious benefits of the backbone enterprises of the rapid development of Chinese special appliances, sincere circuit, and a group of high technology content, good market prospects significantly expand the scale of growth-oriented enterprises . At present, Qimen county in power electronic components, the green light, environment-friendly UPS batteries, motors and other electrical and electronic-based industrial clusters have grown to 15, accounting for the county the total number of industrial enterprises above designated size nearly a third. Huangshan Electric, Walt electric, sincere circuits, gate of Chinese electronics products have been a number of enterprises producing interrelated and formed a relatively complete upstream and downstream industrial chain. In the meantime, Qimen County also electrical and electronic industry, scientific and technological innovation and transformation as the leading enterprise-scale expansion of the "booster" to encourage companies to develop new products, innovative technology, effective in promoting energy-saving electrical and electronic industry, descending consumption and product diversified lines of products.
'
According to statistics, in recent years, the introduction of Qimen County industrial projects, the electrical and electronic manufacturing sector accounted for about 30%. Among them, 15 enterprises of the national patent applications for industrial enterprises in the county accounted for 50% of the total patent applications. In the first half, electrical and electronic industry has accumulated funds for technological renovation invested nearly billion, accounting for county-wide technological transformation of industrial enterprises invested 30%. 228.389 million yuan achieved industrial added value, accounting for the total county industrial enterprises above designated size of 37.82 percent over the same period last year increased by nearly eight percentage points.
Electric Porcelain Manufacturing Sector To Achieve Scientific Development
Jiangxi Pingxiang Luxi is the famous "hometown of porcelain", large and small businesses hundred electric porcelain products are mainly low-voltage and high voltage porcelain, the domestic market share of 40%, exports accounted for about 20%, but excess capacity, the market began to atrophy on the whole situation is not optimistic, in addition to a highly competitive market, the fear is still a product development issues. austrian crystal earrings
multi gem earrings
Not long ago, a family Pingxiang Electric Porcelain corporate CEOs about the market, he said: market more and more difficult, and peers increasingly keen competition, really worried about the way of existence of enterprises.
The CEOs to worry, it is understood, electric porcelain products of technological innovation is not enough, almost all remain in the traditional formula of raw materials and production process technology, even if the introduction of talent and technology of the manufacturers is also the starting point is not high, pure imitation, there is no their own innovations.
For example, a family business producing high-voltage porcelain, and even an undergraduate ceramic professional staff are not, only a few graduating from high school and worked as quality control is not the responsibility of school ceramics, but also quite different from electricity, only would operation only, even if the charge can only be engaged in technical books and pay according to work, not to mention research and development innovations; not to mention the rest of the small enterprises, almost family-run factories, conditions are good points, there are simple tests between laboratory analysis chamber condition is poor rule of thumb, and the whole is a simple repetition to repeat. This production of electric porcelain products naturally competitive, so the market is getting increasingly difficult.
The CEOs say that they plant in each of the high-voltage porcelain prices in 1800 ~ 3000 per hour, low-voltage electric porcelain in 50 to 300 per hour, which also determined the voltage rating, only in accordance with this price, the profit is only 16 % or so, in order to open up the market to sell their public relations, increased significantly, accounts for more than 10% of profits.
The end of the beginning of the end of every two, it is signing the tender of the season, was bidding signing business is gas and gaiters, without signing the tender enterprises can only ask for help everywhere, so that point of order in order to adequate food and clothing. Now raw materials, fuel prices and labor wages, corporate profits have been held down little small.
Transmission lines are now at home and abroad to the special high-pressure development, and has emerged 1000 kV EHV transmission system. Are household appliances production of domestic porcelain hollow insulator each of 1000 kV is 68 million, while the initial quote was actually 4 million yuan of foreign / sticks out of the UHV due to the development of China after the success of product research and development, they immediately cut prices to 200 yuan / branch.
In recent years, technological innovations have been able to access ultra-high pressure, high-quality porcelain, such as by the aluminum-containing raw material bauxite, kaolin and clay mixed and sintered to produce triclinic crystalline flake type of aluminate, due to compact structure, The role of acid-base pairs of high chemical resistance, compressive strength of up to 5000 ~ 6000kg/cm2, resistance properties of 1.2 × 1013 Dao 3.5 × 108 ohm / cm3.
Some studies have shown that in the original production process electrical porcelain coated with a layer of adobe on a 2mm thickness of andalusite and blue crystal stone coating, further sintering, its products can improve the compressive strength to the 1200kg/cm2, almost doubled .
Study abroad, with three-laminated glass porcelain pottery making, its compressive strength of more than has been produced by a variety of reinforced ceramic porcelain, but also wrestling is not broken, abnormal strong, extremely light weight. Domestic production of composite materials are also useful for non-ceramic porcelain, and the advantages far beyond the production of porcelain ceramic. They all can be achieved 1000kv EHV electrical porcelain.
Enterprises to survive, they have scientific development, through continuous innovation, have a foothold in order to revitalize the Pingxiang Electric Porcelain Company. If you rely on to expand the production scale, repeated low-level construction, industrial park and then large, beautiful plants and then, I am afraid will not help.