Fuji Star: Ps Version Was Looting, But Prices Do Not Regret It

Frbiz Site


[Solemnly declare: All signed "HC Network printing industry channel" original works belong to Ben Wang, websites or individuals wish to be reproduced in the Department of the source and author rights reserved. Recent editorial in this channel has repeatedly found that many Internet media and DM original publications are reproduced in this channel and the source of the article is not the Department, to remind the attention, be held in the end. ]  



Introduction: the end of February, convened by the National Indian Workers Association, 41 companies in Hebei Zhuozhou plate signed "PS version of the 2006 National seminar on the factory", "summary" of the views put forward recommendations: From March 1 beginning, the enterprise version of PS on the basis of selling prices in principle, the existing prices of 3 yuan / square meters, on this basis to take high-quality products at higher prices, enterprises were determined independently. " heat laminating

dye sub printer

  Understand the background of the meeting, it was later accepted a seminar organized by HC Network interview one of the sales in North China Aluminum Industry Minister Wang Shu analysis, is: "Last year in October or so, aluminum ingot prices from 16,000 yuan / ton up to 18,000 yuan / ton, in December is still up. and at that time is inconceivable that the PS version of the manufacturers plate prices are dropping their prices. This was the trade in the industry have been talking about the concerns of the industry reshuffle growing "(see Adverse economic and long-term action of plate prices favorable to the industry ). Many of the industry, said manufacturers plate on the industry, some of the bad situation, has reached an intolerable point, and the call in the Indian Workers Association, and actively participated in the "2006 National Symposium PS plate production plant," It is understood that when many business at the meeting made an impassioned speech. After the "summary" signature situation is very satisfactory, including Henan, two plastic, Fuji Star, Sichuan torch light, including 41 companies (see Plate business meeting "minutes" on the signature of the 41 plates and commercial enterprises list ) In the "summary" in the signing, only 4 companies did not sign. However, after the price increases and expectations of a far cry from the situation, some companies because the signed but not prices, declined interview requests HC network; also unconfirmed reports that some manufacturers in prices after "callback." And early in March, follow-up reports on the HC net prices incidents PS version, and make related topics "print material prices thunder, little rain," For more than an interview signature business, publicly acknowledged and accepted the interview of the company prices only Fuji Star 1.



Held in September 22's "On the closing ceremony cum Hualian Thanks printing open meeting" (hereinafter referred to as "banquet"), HC mesh editing and Fuji Star Co., Ltd. Deputy General Manager Zhu Youfu were sitting at one table. The banquet, Zhu Youfu name cards with each other when I know I once interviewed him. Zhu Youfu offering to date from 3 months, price increases only Fuji Star Enterprises one. Sitting next to Fuji Star Printing Equipment (Shanghai) Co., Ltd. Beijing Office Director Rao Xiaobo said that Fuji stars in the prices of a lot about the pressure, but the overall sales did not decline (see " Fuji Star said the prices of domestic manufacturers is only the PS version of a "). Zhu Youfu also take the initiative to ask the author of the PS plate prices in the end the event there is no trace of interest. September 26 5:30 pm, I propose Mr. Zhu Youfu on Fuji Star event in the PS version of the reasons for price increases, positions, losses and the "summary" Why not after the signing of manufacturer price increases and their impact on the industry issues answered.  



Click into themes: Print material prices: thunder, little rain



Click to enter exclusive comment: Plate prices sword look around it is regrettable that those who deserted?



HC Network : 3 months after the PS version of forum, when you have received my interview, said the goal of Fuji star is 3 yuan rise, but only up 1-2 dollars. I ask that in this nearly 5 months after the time, Fuji Star's version of what material price fluctuations it? Why?



Zhu Youfu : Basically. Fuji Star PS version of price increases did not meet three yuan. This is related to corporate structure, market behavior has a relationship complicated. Other manufacturers do not rise, on the contrary that our prices, and also did some work (Note: The "work" is mentioned below, the "looting"). We also lost some customers, in May we have taken measures accordingly, only now gradually stabilized. We originally planned a July 1 to conduct a second round of price increases, do not move, is also based on the above considerations.

Sichuan, In 2010 The Total Investment Of Highway And Waterway Transport 73 Billion Yuan

Frbiz Site


This year, the Sichuan highway and waterway transportation construction investment objectives are: to ensure that 73 billion yuan, 76.0 billion to complete the work according to the arrangements, an increase of 37.4%. This is the news from the February 3 meeting of the province Transportation Work was informed of.



Now completed and under construction in the province reached 5,260 km of highways, based on the end of 2007 doubled the country's ranking from No. 12 to No. 5. This year, the highway construction will be completed investment 40.5 billion yuan, 14.2 billion to complete construction of trunk roads, rural road construction completed 18.2 billion, 2 billion yuan to complete waterway construction, site construction completed 1.1 billion. Strive to end investment in 91.4%, 96.3% completed the project, initially hit the lifeline road network. earring boxes

wooden jewellery box

Year: Ying lying, Chuan Wen, Wen Ma Road traffic



Province, Gao Feng, Director of the Office of Transportation, this year, Sichuan will be basically completed the task of post-disaster rehabilitation and reconstruction of traffic, to the end of September, Sichuan disaster highway and waterway transportation reconstruction accumulated 86.7%, 95.4% of completed projects; try this year bottom, total investment 91.4%, 96.3% completed the project, initially hit the lifeline road network.



The same time, the full protection of Sichuan this year will also reflect the (show) lying (Long) Road, River (Main Temple) Timor (River) Road, Timor (River) Ma (Kang) Road, and other key projects to ensure that the basic year forming traffic capacity. Full break-mao (County) North (Sichuan), sheep (Bamboo) Mao (County) Road and loess, Balang, Snow Mountain Tunnel and other key Xialiangzi difficult project.



This month on the 10th: Guang Shan high-speed board off the opening paragraph



Guang Shan in Sichuan speed is my major thoroughfare north of the River, the Sichuan-Shaanxi border off the board than the field of dam to 1.5 km, is the famous "Kabo Zi" section of Sichuan, the direction of 500 meters off the board after a long uphill ramp , Car There can be only 10 km per hour, into a big traffic jam Sichuan often formed here.



2 3, fast company, said Sichuan, Shaanxi and high-speed wide section of the board are being laid off the road, on February 10 after the opening of subsolar Wednesday, the board will no longer be relevant, "Kabo Zi" section. By then, traffic will be diverted off the board, with the old path of the formation of segregation trend: a new path for the vehicle into the Sichuan use the old road confessed River traffic.



End of this year, extensive high-speed forming Banfu traffic capacity of Shaanxi, Sichuan vehicles will go fast, go out of the original line of Sichuan vehicles, greatly reduce the traffic pressure.



Anticipated in June 2011, Guangzhou high-speed will be established in Shaanxi and Chengdu by Guangyuan, Hanzhong to Xi'an will be achieved through high-speed across the board.



In the first half: Chengdu High-speed start the second Ring



Sichuan this year, will focus on speeding up highway construction, Lok Yi, Qiong name, to Xing Jing and Mianning to the Xichang, wide high-speed bus in Pakistan to wangcang, cotton Suining, then road section opened to traffic, all provincial highway mileage to 2681 km.



This year, the second around the city of Chengdu High-speed, Leshan to Zigong, Nanchong to Liangping, then Hill section of Mei-Mei and other capital projects will be started. It is understood that Chengdu has the second high-speed beltway through open Tender Way of identifying the investors, will start construction in the first half of this year, the project will greatly promote the formation of large economic zone in Chengdu.



Waterway, the Yangtze River this year, Yibin, Sichuan will promote to the water-rich section 3 Channel Improvement Project under construction, speed up the Jialing River Tingzikou Cangxi and construction, Shaxi, Fung Yi field, small gantry avionics hub for design water . Completion of the Minjiang large waterway project, accelerate the continued construction of Luzhou Port Phase II, Yibin City, jobs in Hong Kong Chi District 1 Construction And so on.

Contour Cutting Processing Of The Application Of The Mold

Frbiz Site


The development process in the UG, CAM has been the processing industry are the most reliable partners in the workpiece. It not only provides accurate and reliable partner Tools Path, leaving NC programmers can design arbitrary increases in the eyes of most efficient Project Type. CIMdata survey last year reported that, EDSUG be regarded as all the supplier of CAM software, the most powerful competitor.



UGCAM has the following characteristics: Provide reliable, accurate tool paths. Directly in the surface and the entity processing. recliner sectional

contemporary sectional sofa

Good user interface, promised to work according to the needs of users, customized user interface can not only improve the operating efficiency and energy use and preserve the Konw-how.



Processing methods to provide diversity to facilitate the NC programmer to design a variety of highly efficient tool paths.



Provide a complete tool library and the library management function of machining parameters, so that new staff can take full advantage of the experience of senior staff, well designed tool paths. Universal



provide post-processing to generate the NC machining program for the NC.



UGCAM includes 2-axis to the five-axis mill, ó bed mill, wire cutting, large database management tool, physical simulation, after cutting and general purpose Processor And so on. In this article the author introduces triple-axis contour milling in the cutting in Mold Processing of the application.



Contour cutting Contour cutting in the mold processing, the main force for the need for tools and uniform processing conditions. Such as roughing, general tool by the powerful, so able to control the cutting contour cutting depth manner, the tool force is limited to a range. In addition, the processing or finishing, the processing area if too steep, too, need to extend the blade longer the case, due to long working hours deflection tool too, often need to use high-cut way to reduce tool force. The most popular high-speed cutting machine, cutting the users is high.



UG contour cutting function not only offers a variety of processing methods at the same time promised to the processing tool can be shaped in a uniform force can, and do the fastest, the best cutting. The following are the characteristics of UG contour cutting. Tool use is not restricted



NC machine tool programmers can follow the performance of billet material, clamping means and the cutting efficiency considerations, to choose flat knife, ball tool, round nose knives, T-type knives and other cutting tools for contour cutting. In the calculation, UG use the selected tool, such as along the machined surface layer calculations, they are able to produce accurate tool paths. Figure 1 and Figure 2 shows the T-type knife with a cutting tool path, Figure 3 shows the flat blade with a cutting tool path (thin line for the tool path).



Automatically detect the oblique down area (undercut)



UG automatically detect processing within the undercut region, and the tool automatically calculates the best path. Figure 2, with T-blade milling, if Chuck Non-interference in the processing side, UG possible for the most complete cutting. Figure 3, due to the cutting knife with a flat, so undercut region, UG generated tool path to process the entire tool surface does not met the principle.



Offers a variety of tool path patterns



UG contour cutting Gong Zhu double cutting, one-way cutting, spiral cutting, edge cutting and multi-border cutting. Which provide an efficient multi-layer border cutting crude feedstock processing path is steep deep processing of surface finishing a good choice. High-speed cutting machine can use this function to produce good machining path. Figure 4 for the multi-layer border cutting tool paths. Triple Road, every depth generate tool paths, the first product from the surface 3mm, second third-Road from the product side 1mm while processing the product surface.



Uniform force generated tool path processing



Mold machining, NC programmers or machine operators, often in order to avoid the NC program, tool locally excessive force, causing serious loss of the case tool, reducing the overall path, feed rate and the impact the whole processing efficiency. UG offers a variety of ways to set the feed rate, to solve this problem. Users can set the tool force feed the local rate (such as cutting the first cut, tool path back and forth, the tool path round the corner)



Set different regions at different depth of cut height



Processed in order to be able to leave a uniform billet, without consuming unnecessary processing time. UG offers users, according to workpiece shape characteristics, at different altitudes area, set a different depth of cut. Shown in Figure 5, along the surface of the multi-processing to do when we set in the steep region greater depth of cut, in flat areas, smaller depth of cut setting.

Tianjin Machine Tool Exhibition 2010, The 9th International Machine Tool Fair Sega

Frbiz Site


Show Time: 2010-03-10 to 2010-03-13 Exhibition period: 1 year Founder time: Years Application Deadline: February 19, 2010 Venue: Tianjin International Exhibition Center Hall Name: Tianjin International Exhibition Center Sponsored by: Sega Exhibition Service Co., Ltd. in Tianjin, Sponsor: Sega Exhibition Service Co., Ltd. of Tianjin, Exhibits: Metal Cutting Machine Tool categories:



Various CNC machine tools, machining centers, industrial robots and flexible manufacturing cell; lathe, milling, grinding, drilling, boring, gear system, machine tools, screw machine tools, cutting tools, machine tools, combination tools, etc.; power processing, laser processing and other special machine tools 42hl167 toshiba

42hl67 toshiba

Forging Machine Tool categories: Hydraulic machines, punching machines, shearing machine, bending machine, pipe bending machine, bending machine, efficiency is effectively flat machine, air hammer, forging equipment, forging machine



Public folder measuring categories: A variety of tools, tools, fixtures, abrasives, grinding wheel; all kinds of measuring tools, measuring instruments, measuring equipment, test equipment, coordinate measuring machine, testing machines, balancing machines and all kinds of testing tools



CNC & Automation category: Numerical control system (NC, CNC, DNC, PLC); network technology, step system, servo drive systems, digital device; spindle, CNC turret, tool storage, linear guide, rolling screw focus lubrication points, set (row) chip unit, towline and other machine tool parts, accessories, machine tools and mechanical equipment, electrical power control and frequency conversion; hydraulic, pneumatic, sealing devices and cooling devices; transmission devices; lubricating and cooling fluid, etc.



mold and Materials: Mold design and manufacturing technology, mold CAD / CAE / CAM expert system, plastic mold, rubber mold, stamping mold, automobile parts mold, die casting and gravity die casting mold, rapid tooling and rapid prototyping technology, mold standard components, mold materials, auxiliary materials, graphite electrode; die-casting machines, injection molding machines and mold manufacturing equipment



casting machinery: Mixer, molding machine, Sanding machine, melting furnace, sand off the machine, shot blasting machine, aging equipment, etc.



Computer Application Technology (CAD / CAM / CAE / CAPP / PDM) class



industrial containers, tool cabinets, storage, logistics and equipment; Details: projected scale: 36,000 square meters exhibition area is unprecedented, the Bohai Sea of China's top event; Booth Number: 1500 international standard booths; strong media: 118 thing as a professional press release ; network coverage: 365 days of full, uninterrupted form of publicity; audience Source: estimated 60 000 domestic and foreign potential buyers; invite you?? participate in the Bohai Sea of China's most professional industry event; "Sega Machine Tool Fair" has been successfully held the eighth in recent years, as China's booming Bohai Rim rapid development of industrialization, and the participants of the widely recognized, "Sega Machine Tool Fair" size more than 50% annually The rate of increase of the Bohai Sea region has become the largest and the highest level, showing up in kind, on the Bohai Rim customers the most attractive professional international exhibition. "Sega Machine Tool Fair" uphold the rich resources and experience before the eighth, will erect a first-class bridge, first-class arena, business opportunities waiting for you! Tianjin ¬ ¬?? Hot economic region, create significant growth opportunities in Tianjin, Beijing, Tianjin rely on the service the Bohai Sea, radiation "Three North", for Northeast Asia, bringing together the port, development zone, bonded area, the marine high-tech development areas and large industrial base, manufacturing a huge demand. Focus on the Bohai Sea gold zone opportunities Bohai economic circle has become the "Pearl River", "triangle" area after the new economic growth pole in China, Beijing, Tianjin is expected around 2010 and even the northeast section of China's economy Asia's most influential economic uplift zone. With the slowdown in the world economy, export-oriented economic model of China's exports will be affected, depend on expansion of domestic demand growth has become a consensus. Tianjin and the Bohai Economic Rim will no doubt become a "wave of the next round of growth," the commanding heights. Port city of rapid development, market demand and huge Tianjin, is the only gathering the port, bonded, marine high-tech development zones and large industrial base in the area, in order to ship, petroleum, chemicals, machinery, energy, port for the leading industrial system of rapid development, has demonstrated the huge demand for machine tool market. In 2009 the 11th China International Machine Tool Show held in Tianjin, a major conference on industrial projects, focusing on promotion of the 80 major projects, equipment manufacturing accounted for 34, a total investment of 170.6 billion yuan. 228 billion for the five automotive industry project, cars will be an annual production capacity of 2 million. There are sea oil exploration equipment base project, wind power equipment manufacturing projects. By 2011, with the healthy functioning of industry cluster base, Tianjin equipment industry, industrial output value will reach 1.093 trillion yuan, and has become an important power equipment industry. Tianjin Binhai New Area to be included in the national development strategy, the Tianjin to speed up industrial restructuring, vigorously develop competitive industries such as manufacturing equipment. Tianjin is now accelerating the implementation of 100 major industrial construction projects, which will strongly boost the economic growth of Tianjin, which the equipment needed for fixed investment is mainly machine tools, for Tianjin has become the most attractive of the machine tool consumption market. Strong support of the equipment manufacturing, metal processing industry historical opportunity countries attach great importance to the development of equipment manufacturing industry, early adoption of the "equipment manufacturing restructuring and rejuvenation program," China's equipment manufacturing industry will have a positive and significant for . World-class shipbuilding base relocation project Tianjin Xingang Shipyard, China Petrochemical large investment projects, total investment of up to 36 billion yuan of port infrastructure, the Airbus A320 assembly line production and the successful test flight for the metal processing industry, provided a rare opportunity for development . Bohai Sea is the world's manufacturing base, and almost all industries, the huge market demand in Tianjin, a machine mold manufacturer contested. Participated in the fair grounds held in Tianjin for many years in the industry to form a good habit overseas buyers to visit a yearly event brought together an increasingly large number of domestic and international class enterprise & industry # 61492; and heavyweight professional buyers can face only four days from various countries and regions, with tens of thousands of buyers negotiate the exchange exhibition metal cutting machine tools: all kinds of CNC machine tools, processing centers, industrial robots and flexible manufacturing cell; car

What To Buy Business Items To Catch Votes In 2012, Ark?

Frbiz Site


About to enter 2010, from the so-called "doomsday prophecy 2012" seemed to close a little. Movie "2012" to the global community to refocus on the Mayan prophecies of the "doomsday" deadline, causing everyone on the film goes on the value of one billion euros in the "Ark of votes" endless curiosity, they puzzle their astronomical value . If I do not have billions of euros, is not it indicates that the face of such a disaster, I only fatalistic with Tong Fu destruction? ?



Believe many people will be issued such a sigh, even if I start now, save money, nor could have managed to save enough in 2012 to 1 billion euros in exchange for an "Ark vote" right. Even if one can change that my family? ? Since the throttle No, it can only open source. Now I'll introduce a few more money-making venture, hope that we can by 2012, to earn enough money to save human life on board the "Noah's ark." reverso pump

pool filter supply

19 century by coal-driven, in the 20th century by the Oil Drive, while the 21st century will be solar, wind, renewable Energy Century.



Organic Food Is the product of a high standard, based on the sustainable development of the ecological environment for the purpose of "land to table" quality control to achieve full production out of the safety, health, quality of food. There are many types of organic products, the price is usually more than twice the normal product, which is impeding an obstacle to the rapid expansion of the market. The organic products as Gift Have become a trend for other companies that offer good opportunities.



Electronics One charm of business enterprises and consumers to a variety of cost savings. Over the past decade, rapid development of electronic commerce, and Alibaba have become synonymous with e-commerce. But e-commerce is a need for innovative industries, the creation of commercial models will undoubtedly bring about restrictions on the follow-up e-commerce, but the wind is even more optimistic about business investment and the recent official website for the new model of e-business carrier. The recent "corporate website as the core of B2B e-commerce platform" 66 mesh on the favorite won the VC, it is the completion of the first injection of millions of Cooperation . I believe the future of e-blue sea, will focus on the official website as the core of enterprise e-commerce service platform.



Psychological field is considered one of the few blue ocean areas, for psychological services such as Ni Zijun are concerned, at this time may be a golden opportunity, the entrepreneur can not only realize their value and help more people get happiness, you can create in the process of wealth.



China has the world's largest mobile phone users, the number of mobile Internet will be a huge market of billions or even trillions, by many industry optimistic. Despite the scale of income is reached only 3G mobile Internet portal business, etc. a few companies, but more and more entrepreneurs targeting the prospect of great opportunity.



Although the economic crisis, massive layoffs or even closure of some customers, but does not affect the human resource outsourcing business of sustainable development. Related to that, the economic crisis so many companies choose a more flexible employment approach, many professionals face career challenges, which are for human resources services firm offers opportunities.



In fact, the disaster is not terrible, terrible loss in the face of disaster response that some of the wisdom and ability, like "2012" in a male and female efforts to survive, what they have to actively strive for wisdom before the robbery in exchange, after the last one happy. Business is the same opportunity to you, left is their unremitting efforts to actively strive for success. I believe we take advantage of the opportunity, regardless of whether the arrival of 2012, the end of the world, you can have a Login "Ark" qualifications.

A Feeling Of Incompetence Confessions

Frbiz Site


Thirties my wife and I are young, we are requirement is very strong. Love, we established a very strong feeling. The first two years of marriage, we had very hot sex life. Can not long before I sick, can not lead a normal sex life. My wife and I always talk about anything you can say no ill feelings between each other. We now discuss how to have sex after starting the questions.



Although we can not normal sexual intercourse, but we have our own unique way to have sex. When we remember the past, those feelings and experiences of life and found sex life not necessarily to sexual intercourse, many sexual activities can also be called sex. guaifenesin

racecadotril

Sex life what is it? Is to have sex with each other's feelings, resulting in sexual impulses, feel the opposite sex to bring you happiness, which can be called sex. We often say that romantic love, then mutual flirting. The wife will ask me touch her sensitive areas. I gently caress her body, her body warm Wen Bian, you can make her orgasm. Whenever I see the way his wife happy, I am very satisfied. We often in the form of improved sex life, we have only one aim is to make each other happy. I am a man, a young blood of man, if I can not in the early stages of illness is sensible, and his wife discuss the problems of life, once the couple have to worry about this problem, we not ventilation, depressed, quickly will lead to psychological problems, resulting in mental and emotional crisis, we see this situation from the press is a lot of. Good feelings my wife and I, we cherish each other, they must find a way to solve the problem of sexual life, which is a major issue to maintain marital relations.



Wife was caring for my body, sometimes I want to be required by the penis, the wife would refuse me gently, she said: impatient, and other disease is cured, say, as long as your body good We Enenaiai to grow old, I'll be satisfied. His wife will use a variety of ways to make my sexual pleasure, when that moment, I always excited, feeling very impulsive, as if back to the love of the stage. I think the sexual content is very rich, so-called argument orgasm, according to my understanding, not necessarily at the time of sexual intercourse can be achieved, for example, his wife told me that she even think, let me kiss the body caused by sexual even more than the simple sexual intercourse climax fascinated her, and I admired all the wonderful wife orgasm, when, and he is very happy and comfortable.



Once, I asked the wife, I can not have sex with her, a long time will make her sexless. She said, how? Is offensive or sex life, hate the opposite sex, all acts of sexual annoyance, we are happy that `Why, where's the frigid? In the years since my illness, we change the traditional form of sexual intercourse, on behalf of the other sex in various ways, the same husband and wife to live a happy, feeling increase. I am grateful to my wife's love, so that my heart is not due to illness caused by a lot of pressure, but I think the most important thing is to have strong confidence in their own, couples have the right and healthy life, knowledge can not Life is simply that the husband and wife sexual intercourse, nor can use a simple "feelings Haojiu Xing, and have no sex life does not matter" to the idea of self-deception, but should be positive aspects to explore deeper meaning of life. Sex and love is difficult to separate the form, you can not say at this time is love then as sexual, but should Xing Huai rub together. `I believe that many husbands and wives of the situation as we do, but I know that many people can not be sexual intercourse so much noise utter confusion, I hope we can give you an example to provide a little help.

Wto Ruling On Auto Parts Import Management Irregularities

Frbiz Site


Originally on July 1 this year, the official full implementation of the "vehicle features constitute the Administration of Import Auto Parts" (hereinafter referred to as "measures") may be further delayed in the understanding of the implementation of 3 years. Information Office of the Ministry of Commerce said yesterday, still studying the ruling of the WTO on the 18th to the report, the report said, "China's auto parts import management practices violate trade rules," whether an appeal still no statement.



China Association of Automobile Manufacturers Trade Commission, the Secretary-General Zhang Boshun the market yesterday that the negotiations continue, problems are resolved, the Government will take compromise or dilute the contradictions, that is, not the full implementation of "measures", but also The results are not announced. Affected businesses, according to the former import tax rules. hilti te25

build a wood retaining wall

Ministry of Commerce is to discuss response measures



The World Trade Organization dispute settlement body announced the 18 expert group on China and the U.S., EU and Canadian auto parts dispute the ruling tripartite report in February this year, its distribution to the parties of the interim report (preliminary results) consistent, basically supported the United States, Europe, Canada's view that China has more than 60% over vehicle parts imports by the practice of vehicle tax on imported auto parts constitute discrimination, breach of the relevant trade rules.



Accordance with the WTO dispute resolution procedures, the Chinese have the right to appeal against ruling group of experts. Appeal from the WTO Appellate Body to deal with.



Commerce for WTO Dispute Settlement Law Department yesterday not to this position. The Information Office of the Ministry of Commerce said in a telephone interview, is to discuss response measures to be introduced soon stand. Chinese Ministry of Commerce officials have said China's auto parts import regulations is to prevent the lawless use of vehicle and spare parts to avoid customs tax poor supervision, tax evasion behavior, but also to combat the illegal assembly, measures to protect consumer interests.



Modify the "measures" to benefit only that high car



Market and Trade Commission of China Association of Automobile Manufacturers, said the Secretary-General Zhang Boshun, although the Chinese WTO judge violations, but the Chinese still have the opportunity to appeal, a process that will last 3 years. As it involves the adjustment of the production area, the dispute may go to the newly established Ministry of Industry and Information processing.



He said, as Brilliance, BMW, Mercedes-Benz is still in Beijing, "approach" provides a 10% tariff. Has not been the "measures" the impact of introduction.



WTO expert Zhang Hanlin of the view that a dispute has not implemented the law is not necessary, do not be too concerned with WTO ruling on China. Approaches must modify, but there is no need to care too much about. He said changes to the production company must meet the 60% localization rate. In fact, even if the modification "measures", and only luxury car manufacturer to benefit most of the existing joint venture has increased localization rate, the public even more than 90%.



Long-term focus on the automobile industry, Zhou Jun said that China would lose the results of high-end parts made OEMs to reduce the enthusiasm, as currently only a few million-scale investment in luxury cars is building a larger package, and can really reduce the cost of such parts plant can not complete for other customers.



He believes that this incident will impact parts and components industry trends, the future establishment of foreign-owned parts companies in China, the trend will become increasingly apparent. Because China does not have high-end independent parts spare parts business of technology, no matter what the outcome of this dispute will not impact on these companies, but Zhou army that will accelerate the industry reshuffle, parts industry structure will be more clear. Joint venture and its parts suppliers more closely, and independent brands such as engine parts enterprises to enter the EFI system, ESP, airbag areas such as high-end components will be more difficult.