Frbiz Site
Solar car racing refers to competitive races of electric vehicles which are powered by solar energy obtained from solar panels on the surface of the car (solar cars). The first solar car race was the Tour de Sol in 1985 which led to several similar races in Europe, USA and Australia. Such challenges are often entered by universities to develop their students' engineering and technological skills, but many business corporations have entered competitions in the past. A small number of high school teams participate in solar car races designed exclusively for high school students.
Distance races
The two most notable solar car distance (overland) races are the World Solar Challenge and the North American Solar Challenge. They are contested by a variety of university and corporate teams. Corporate teams participate in the races to give their design teams experience of working with both alternative energy sources and advanced materials. University teams participate in order to give their students experience in designing high technology cars and working with environmental and advanced materials technology. These races are often sponsored by government or educational agencies[citation needed], and businesses such as Toyota keen to promote renewable energy sources.
argus projector
Support
optoma ep910 projector
The cars require intensive support teams similar in size to professional motor racing teams. This is especially the case with the World Solar Challenge where sections of the race run through very remote country. The solar car will travel escorted by a small caravan of support cars. In a long distance race each solar car will be preceded by a lead car that can identify problems or obstacles ahead of the race car. Behind the solar car there wil be a mission control vehicle from which the race pace is controlled. Here tactical decisions will be made based on Wi-Fi information from the solar car and environmental information about the weather and terrain. The mission control car could be able to remote control the vehicle power/speed using adaptive cruise control leaving the driver only to do the steering. Behind the mission control there might be one or more other vehicles carrying replacement drivers and maintenance support as well as supplies and camping equipment for the entire team.
Dutch Nuna 3 team during testing in 2005.
World Solar Challenge
Main article: World Solar Challenge
This race features a field of competitors from around the world who race to cross the Australian continent. In 2005, the Dutch Nuna 3 team won this challenge for a 3rd time in a record average speed of 102.75 km/h over a distance of 3000 km, followed by the Australian Aurora (92.03 km/h) and the University of Michigan (90.03 km/h). The increasingly high speeds of the 2005 race participants has led to the rules being changed for future solar cars starting in the 2007 race.
The 20th Anniversary race of the World Solar Challenge ran in October 2007. Major regulation changes were released in June 2006 for this race to increase safety, to build a new generation of solar car, which with little modification could be the basis for a practical proposition for sustainable transport and intended to slow down cars in the main event, which could easily exceed the speed limit (110 km/h) in previous years. The winner again was the Nuna 4 team averaging 90.87 km/h. The winner in the Adventure Class (driving under old rules) was the Ashiya University Solar Car Project team averaging 93.57 km/h.
North American Solar Challenge
Main article: North American Solar Challenge
The North American Solar Challenge, previously known as the 'American Solar Challenge' and 'Sunrayce USA', features mostly collegiate teams racing in timed intervals in the United States and Canada.
The North American Solar Challenge was sponsored in part by the US Department of Energy. However, funding was cut near the end of 2005, and the NASC 2007 was cancelled. The North American solar racing community worked to find a solution, bringing in Toyota as a primary sponsor for a 2008 race. The last North American Solar Challenge was run from July 13-21, 2008, from Dallas, Texas to Calgary, Alberta. The race was won by the University of Michigan Solar Car Team.
The Dell-Winston School Solar Car Challenge
Main article: Dell-Winston School Solar Car Challenge
The Dell-Winston School Solar Car Challenge is an annual solar-powered car race for high school students. The event attracts teams from around the world, but mostly from American high schools. The race was first held in 1995. Each event is the end product of a two year education cycle launched by the Winston Solar Car Team. On odd-numbered years, the race is a road course that starts at the Dell Diamond in Round Rock, Texas; the end of the course varies from year to year. On even-numbered years, the race is a track race around the Texas Motor Speedway. Dell has sponsored the event since 2002.
Other races
Formula G, a yearly track race in Turkey. It's organized by TBTAK.
Suzuka, a yearly track race in Japan.
Phaethon, part of the Cultural Olympiad in Greece prior to the 2004 Olympics.
World Solar Rally.
Shell Eco-marathon Americas
Solar drag races
Solar drag races are another form of solar racing. Unlike long distance solar races, solar dragsters do not use any batteries or pre-charged energy storage devices. Racers go head-to-head over a straight quarter kilometer distance. Currently, a solar drag race is held each year on the Saturday closest to the summer solstice in Wenatchee, Washington, USA. The world record for this event is 29.5 seconds set by the South Whidbey High School team on June 23, 2007.
Vehicle design
Solar cars combine technology used in the aerospace, bicycle, alternative energy and automotive industries. Unlike most race cars, solar cars are designed with severe energy constraints imposed by the race regulations. These rules limit the energy used to only that collected from solar radiation, albeit starting with a full charged battery pack. Some vehicle classes also allow human power input. As a result optimizing the design to account for aerodynamic drag, vehicle weight, rolling resistance and electrical efficiency are paramount.
A usual design for today's successful vehicles is a small canopy in the middle of a curved wing-like array, entirely covered in cells, with 3 wheels. Before, the cockroach style with a smooth nose fairing into the panel was more successful. At lower speeds, with less powerful arrays, other configurations are viable and easier to construct, e.g. covering available surfaces of existing electric vehicles with solar cells or fastening solar canopies above them.
Race vehicles head toward the finish line in the 2005 North American Solar Challenge.
Electrical system
The electrical system controls all of the power entering and leaving the system. The battery pack stores surplus solar energy produced when the vehicle is stationary or travelling slowly or downhill. Solar cars use a range of batteries including lead-acid batteries, nickel-metal hydride batteries (NiMH), nickel-cadmium batteries (NiCd), lithium ion batteries and lithium polymer batteries.
Power electronics may be used to optimise the electrical system. The maximum power tracker adjusts the operating point of the solar array to that voltage which produces the most power for the given conditions, e.g. temperature. The battery manager protects the batteries from overcharging. The motor controller controls the desired motor power. Many controllers allow regenerative braking, i.e. power is fed back into the battery during decceleration.
Some solar cars have complex data acquisition systems that monitor the whole electrical system, while basic cars show battery voltage and motor current. In order to judge the range available with varying solar production and motive consumption, an ampere-hour meter multiplies battery current and rate, thus providing the remaining vehicle range at each moment in the given conditions.
A wide variety of motor types have been used. The most efficient motors exceed 98% efficiency. These are brushless three-"phase" DC, electronically commutated, wheel motors, with a Halbach array configuration for the neodymium-iron-boron magnets, and Linz wire for the windings. Cheaper alternatives are asynchronous AC or brushed DC motors.
A test chassis at Ford Proving Grounds in 1992.
Mechanical systems
The mechanical systems are designed to keep friction and weight to a minimum while maintaining strength and stiffness. Designers normally use aluminium, titanium and composites to provide a structure that meets strength and stiffness requirements whilst being fairly light. Steel is used for some suspension parts on many cars.
Solar cars usually have three wheels, but some have four. Three wheelers usually have two front wheels and one rear wheel: the front wheels steer and the rear wheel follows. Four wheel vehicles are set up like normal cars or similarly to three wheeled vehicles with the two rear wheels close together.
Solar cars have a wide range of suspensions because of varying bodies and chassis. The most common front suspension is the double wishbone suspension. The rear suspension is often a trailing-arm suspension as found in motor cycles.
Solar cars are required to meet rigorous standards for brakes. Disc brakes are the most commonly used due to their good braking ability and ability to adjust. Mechanical and hydraulic brakes are both widely used. The brake pads or shoes are typically designed to retract to minimize brake drag, on leading cars.
Steering systems for solar cars also vary. The major design factors for steering systems are efficiency, reliability and precision alignment to minimize tire wear and power loss. The popularity of solar car racing has led to some tire manufacturers designing tires for solar vehicles. This has increased overall safety and performance.
All the top teams now use wheel motors, eliminating belt or chain drives.
Testing is essential to demonstrating vehicle reliability prior to a race. It is easy to spend a hundred thousand dollars to gain a two hour advantage, and equally easy to lose two hours due to reliability issues.
Solar array
The solar array consists of hundreds (or thousands) of photovoltaic solar cells converting sunlight into electricity. Cars can use a variety of solar cell technologies; most often polycrystalline silicon, monocrystalline silicon, or gallium arsenide. The cells are wired together into strings while strings are often wired together to form a panel. Panels normally have voltages close to the nominal battery voltage. The main aim is to get as much cell area in as small a space as possible. Designers encapsulate the cells to protect them from the weather and breakage.
Designing a solar array is more than just stringing a bunch of cells together. A solar array acts like many very small batteries all hooked together in series. The total voltage produced is the sum of all cell voltages. The problem is that if a single cell is in shadow it acts like a diode, blocking the current for the entire string of cells. To design against this, array designers use by-pass diodes in parallel with smaller segments of the string of cells, allowing current around the non-functioning cell(s). Another consideration is that the battery itself can force current backwards through the array unless there are blocking diodes put at the end of each panel.
The power produced by the solar array depends on the weather conditions, the position of the sun and the capacity of the array. At noon on a bright day, a good array can produce over 2 kilowatts (2.6 hp). A 6 m2 array of 20% cells will produce roughly 6 kWh (22 kJ) of energy during a typical day on the WSC.
Some cars have employed free-standing or integrated sails to harness wind energy. Many races, including the WSC and NASC, consider wind energy to be solar energy, so their race regulations allow this practice.
Aerodynamics
Aerodynamic drag is the main source of losses on a solar race car. The aerodynamic drag of a vehicle is the product of the frontal area and its Cd. For most solar cars the frontal area is 0.75 to 1.3 m2. While Cd as low as 0.10 have been reported, 0.13 is more typical. This needs a great deal of attention to detail.
Mass
The vehicle's mass is also a significant factor. A light vehicle generates less rolling resistance and will need smaller lighter brakes and other suspension components. This is the virtuous circle when designing lightweight vehicles.
Rolling resistance
Rolling resistance can be minimised by using the right tires, inflated to the right pressure, correctly aligned, and by minimising the weight of the vehicle.
Performance equation
The design of a solar car is governed by the following work equation:
which can be usefully simplified to the performance equation
for long distance races, and values seen in practice.
Briefly, the left hand side represents the energy input into the car (batteries and power from the sun) and the right hand side is the energy needed to drive the car along the race route (overcoming rolling resistance, aerodynamic drag, going uphill and accelerating). Everything in this equation can be estimated except v. The parameters include:
Computer simulation of a solar car body design.
Symbol
Description
Ford Australia
Aurora
Aurora
Aurora
Year
1987
1993
1999
2007
Motor, controller and drive train efficiency (decimal)
0.82
0.80
0.97
0.97
b
Watt-hour battery efficiency (decimal)
0.82
0.92
0.82
1.00 (LiPoly)
E
Energy available in the batteries (joules)
1.2e7
1.8e7
1.8e7
1.8e7
P
Estimated average power from the array (1) (watts)
918
902
1050
972
x
Race route distance (meters)
3e6
3.007e6
3.007e6
3.007e6
W
Weight of the vehicle including payload (newtons)
2690
2950
3000
2400
Crr1
First coefficient of rolling resistance (non-dimensional)
0.0060
0.0050
0.0027
0.0027
Crr2
Second coefficient of rolling resistance (newton-seconds per meter)
0
0
0
0
N
Number of wheels on the vehicle (integer)
4
3
3
3
Air density (kilograms per cubic meter)
1.22
1.22
1.22
1.22
Cd
Coefficient of drag (non-dimensional)
0.26
0.133
0.10
0.10
A
Frontal area (square meters)
0.70
0.75
0.75
0.76
h
Total height that the vehicle will climb (meters)
0
0
0
0
Na
Number of times the vehicle will accelerate in a race day (integer)
4
4
4
4
g
Local acceleration due to gravity variable (meters per second squared)
9.81
9.81
9.81
9.81
v
Calculated average velocity over the route (meters per second)
16.8
20.3
27.2
27.1
Calculated average speed in km/h
60.5
73.1
97.9
97.6
Actual race speed km/h
44.8
70.1
73
85
Note 1 For the WSC the average panel power can be approximated as (7/9)nominal power.
Solving the long form of the equation for velocity results in a large equation (approximately 100 terms). Using the power equation as the arbiter, vehicle designers can compare various car designs and evaluate the comparative performance over a given route. Combined with CAE and systems modeling, the power equation can be a useful tool in solar car design.
Race route considerations
The directional orientation of a solar car race route affects the apparent position of the sun in the sky during a race day, which in turn affects the energy input to the vehicle.
In a south-to-north race route alignment, for example, the sun would rise over the driver's right shoulder and finish over his left (due to the east-west apparent motion of the sun).
In an east-west race route alignment, the sun would rise behind the vehicle, and appear to move in the direction of the vehicle's movement, setting in the front of the car.
A hybrid route alignment includes significant sections of south-north and east-west routes together.
This is significant to designers, who seek to maximize energy input to a panel of solar cells (often called an "array" of cells) by designing the array to point directly toward the sun for as long as possible during the race day. Thus, a south-north race car designer might increase the car's total energy input by using solar cells on the sides of the vehicle where the sun will strike them (or by creating a convex array coaxial with the vehicle's movement). In contrast, an east-west race alignment might reduce the benefit from having cells on the side of the vehicle, and thus might encourage design of a flat array.
Because solar cars are often purpose-built, and because arrays do not usually move in relation to the rest of the vehicle (with notable exceptions), this race-route-driven, flat-panel versus convex design compromise is one of the most significant decisions that a solar car designer must make.
For example, the 1990 and 1993 Sunrayce USA events were won by vehicles with significantly convex arrays, corresponding to the south-north race alignments; by 1997, however, most cars in that event had flat arrays to match the change to an east-west route.
Race strategy
Energy consumption
Optimizing energy consumption is of prime importance in a solar car race. Therefore it is useful to be able to continually monitor and optimise the vehicle's energy parameters. Given the variable conditions, most teams have race speed optimization programs that continuously update the team on how fast the vehicle should be traveling. Some teams employ telemetry that relays vehicle performance data to a following support vehicle, which can provide the vehicle's driver with an optimum strategy.
Elevation (in meters) of a race route that crossed the Rocky Mountains, from Illinois to California.
Race route
The race route itself will affect strategy, because the apparent position of the sun in the sky will vary depending various factors which are specific to the vehicle's orientation (see "Race Route Considerations," above).
In addition, elevation changes over a race route can dramatically change the amount of power needed to travel the route. For example, the 2001 and 2003 North American Solar Challenge route crossed the Rocky Mountains (see graph at right).
Weather forecasting
A successful solar car racing team will need to have access to reliable weather forecasts in order to predict the power input to the vehicle from the sun during each race day.
Measured array power for Aurora's Christine in the 2008 WSC.
See also
List of solar car teams
Race the Sun
South African Solar Challenge
Tour de Sol
References
^ http://www.toyota.com/about/news/community/2008/07/30-2-solarchallenge.html
^ WSC 2007 Final Results
^ Official NASC2008 Announcement
^ Official NASC Website
^ solar drag
^ In-wheel motor for solar-powered electric vehicles: technical details (Publication - Technical)
^ The Leading Edge, Tamai, Goro, Robert Bently, Inc., 1999, p. 137
^ Roche, Schinkel, Storey, Humphris & Guelden, Speed of Light. ISBN 0 7334 1527 X
^ Solar Vehicle Performance, Dr. Eric Slimko, December 1, 1991
External links
Wikimedia Commons has media related to: Solar-powered automobiles
Howstuffworks.com: How solar cars work
Solar Decathlon Web site.
DOE announced that the third Solar Decathlon competition will be held from 2007-October 12th through the 20th in Washington, D.C.
Solar cars in inventors.about.com
American Solar Challenge on solar cars article
World Solar Challenge website
North American Solar Challenge 2005
International Solar Car A - Z
The Dell-Winston Solar Challenge
South African Solar Challenge
http://web.ew.usna.edu/~bruninga/APRS-SPHEV.html
Categories: Electric vehicles | Solar powered vehicle racingHidden categories: All articles with unsourced statements | Articles with unsourced statements from January 2009
Saturday, July 24, 2010
Solar car racing
Since joining the group plan to venture capital is more mobile beauty smaller
Frbiz Site
Beauty has become a mobile phone value-added services to the most important part of modern life has become a kind of consumer demand can not be ignored, as the fashion industry, and many branches of the project is ideal for mobile beauty young people engage in, so a lot of hope to create an own cause of small investors, especially university graduates are very concerned about the cell phone beauty, rented a small shop or a mall or a small counter in the corner occupied by a friend of Wang Pu ... ... rush around to create a business of their own.
ear earplugs
Way of introducing mobile phones are basically cosmetic items join a selection of beauty from the mobile phone business "well" design program can be in a good package, and its price from about 8 thousand dollars -2 million, this 8-1000 programs to 20,000 the number of sensible people saw the clear water can be almost all businesses because the market is provided so packed, in order to engage in mobile beauty would have by the mercy of the people.
motorola h5 bluetooth
8 thousand -2 million mobile beauty about barriers to entry, although fairly small investment, but for many business people, or a need to cross the high threshold, is more important is the psychological threshold the true value of the item only 35 thousand have to be pulled out why thousands -2 8 million, that extra out of 5 from 1000 to 10,005 thousand dollars it worth to pay?
Therefore most interested in the mobile phone is the beauty of small investors stop looking and instead choose to invest in other industries. Which also led to many parts of the mobile phone market, a beauty blank, blank form of such a market can be described as the industry now and join the system, which is unhealthy, unhealthy lesions are: to provide mobile beauty joined the business almost entirely in the implementation of a virtual high prices to earn excess profits. Here, we especially for those who want to join the mobile phone business by the persons recommended by beauty Electronics Co., Ltd. Shanghai frame , The company joined the market for the shortcomings of the current, first introduced Since the group's alternative way of joining the program, reducing the threshold to join, for more entrepreneurs of small capital, provides a more convenient and economical way.
New coating printer mobile beauty - Mobile Beauty machine frame 07
Frame mobile beauty machine 07 Price: 2500.00 yuan Beauty spot print cell phone sticker (mobile phone make-up film) image, the output image size is 4 * 6 inches, high quality output allows you to enjoy the perfect color vision really shocked. Support 7 kinds of formats comes with memory card reader ports, operate independently and handle gift cards can be printed without a computer. Gift certificates the same time the standard layout and printing division, like magic software.
Basic parameters Work photosensitive dye-sublimation Power frequency 50-60 Hz Supply voltage 220 V Power 150 W Range of mobile phones should be printed cosmetic film personality map
Technical parameters The maximum resolution of 9600 × 600dpi
Interface Type USB Way for paper space vertical section paper
Memory 2mB High photo quality media type
Work less than 30 dB noise
Print speed 10mm / s Photosensitive dye-sublimation printing method to print
Maximum print format 4 x 6 inch
Color liquid crystal display device with manual operating handle
Paper capacity of 25 Paper type mobile beauty film, mobile phone sticker
Performance parameters Special features watermark Support network printing machine can print LAN connection
Maximum print capacity of 10,000 / month
Shopping guide for your products? Show more good products Landed
Glass industry: in December the price difference is still historically high
Frbiz Site
4 quarter units under the glass material consumption, soda ash and heavy oil prices, the latest data slightly adjusted the "glass - soda ash and heavy oil price differential" model, the actual gross margin with glass fitting R ^ 2 = 0.82, to better explain and track
Actual earnings.
December "glass - soda ash and heavy oil price differential," 30.7, the chain fell 12% in November, with 211% growth for 5 months, 30 more than in the history of high level. 4-quarter "price differential" chain increased 29% in Q3, year on year increase of 76% in Q4 last year.
cabinet key lock
December price of 81 yuan glass BMI / weight case, the chain fell 2 percent in November, an increase of 38%. December soda ash prices chain increased by 0.8%, flat year on year, the chain of heavy oil price increased by 6%, an increase of 15% for 4 months to maintain the upward trend.
swipe card locks
2010-11 times, and bearing our analysis from the three terms.
(1) law of historical profitability. 99 years, gross margins were up or down 5-8 quarter, last quarter, an increase of 5, started to rise in Q2 this year, an estimated 10 years, continued to Q2.
(2) earnings down-cycle corresponds to a single month decline in production and export of glass, rising cycle corresponds to a single month, and exports rose, the first half of 2010 expected production and exports will rise month on month trend will boost earnings an upward channel.
(3) real estate new construction to lag 6-9 months with glass, in June began to rise significantly, according to the current real estate new construction and pipe production next 2-3 quarters will be the peak demand can be expected that the peak current can be profitable continue to next 2-3 quarters.
2009 new glass capacity 17 67.84 million weight cases. 20-29 2010 New Article ,0.8-1 .1 million weight cases, 28 of the 72.76 million weight cases can not be repaired, 9 24.13 million weight cases of cold repair, 11 of 36.99 million weight cases 10 years cold repair of the current production.
2009-10 is expected to glass production capacity growth of 1%, 14% of demand growth of 3%, 11% or so. Supply and demand situation in 2010 is weaker than in 2009, the current restrictions on newly approved national policies and new production lines, which will make 11 years of pressure from a small increase in production capacity.
The first half of 2010, the economy still expected to maintain a quarterly decline in the low season, peak season is still up in Q2. Downward pressure on the second half of the economy, rate would be better than in 2008, earnings still rose by a higher level. Supply and demand picks up again until mid-2011.
Float glass can present high point margin to 40-50%, a record high, even if the glass drop will also lead to a substantial business-than-expected quarterly results 1-2 up. Jin Jing Science and Technology Agency soda recovery, CSG lowe glass is the leading building energy efficiency policies.
Great Seal of France
Frbiz Site
Description
The Great Seal features Liberty personnified as a seated Juno wearing a crown with seven arches. She holds a fasces and is supported by a ship's tiller with a cock printed on it. At her feet is a vase with the letters "SU" ("Suffrage Universel", "Universal suffrage"). At her right, in the background, are symbols of the Arts (painter's tools), agriculture (a sheaf of wheat) and industry (a cog wheel). The scene is surrounded by the legend "RPUBLIQUE FRANAISE, DMOCRATIQUE, UNE ET INDIVISIBLE" ("French Republic, democratic, one and indivisible") and "24 FEV.1848" (February 24, 1848) at the bottom.
The reverse bears the words "AU NOM DU PEUPLE FRANAIS" ("in the name of the French people") surrounded by a crown of oak (symbol of perenity) and laurel (symbol of glory) leaves tied together with weed and grapes (agriculture and wealth), with the circular national motto "LIBERT, GALIT, FRATERNIT".
double sided gloss paper
History
inkjet refill machine
The first seals were created by the Merovingian kings to authentify their orders. Merely rings originally, later worn on a necklace, the royal seals grew bigger and bigger under the House of Capet to reach around 12 centimetres. These are the modern dimensions of the seal.
All the seals under the Ancien Rgime featured the king sitting on this throne and giving justice, yet every king had his own personal seal, a unique item which passed with him. All edicts, orders, decrees and declarations were then sealed.
After the abolition of Monarchy and installation of the Republic on the 21 September 1792, the end of monarchy was symbolised by the seals of the State being broken and sent to the Monnaie (the place where seals and coins are made and stored). In September 1792, Danton (then minister of Justice) had the first seal of the Republic made: a personified Liberty standing, supported by a fasces and holding a spear with a phrygian cap.
Napolon, Louis XVIII and Charles X all took back the seal of majesty, Louis-Philippe showing only his bust.
The present seal dates back to the Second Republic, which briefly used the seals of the First Republic before having a new design made by the artist Jacques-Jean Barre on the 8 September 1848.
Usage
Under the Second Republic, usage of the Great Seal of France tended to be reduced to sealing laws, decrees of the National Assembly and diplomatic treaties. The function of Keeper of the seals was officially linked to that of Minister of Justice at that time (the French Minister of Justice is popularly referred to "Le Garde des Sceaux").
After the Second Empire, the practice of applying seals to laws was gradually abandoned and restricted to constitutional acts and diplomatic treaties (for instance, the Treaty of Versailles was sealed in this way).
Under the Fourth Republic, the only document to be sealed was the Constitution of the 27 October 1946.
Since the Fifth Republic, after sealing the Constitution of the 4 October 1958, it became common practice to seal some constitutional modifications.
Sealing ceremonies are always held at the Chancellerie where the Keeper of the Seals, the Minister of Justice, holds a sealing press affixed to a best and the unique matrices of the Seal of the State.
Sealing documents
Sealing wax
Originally, sealers used a plastic sealing wax which they shaped by hand into generally circular pieces which were definitely shaped by a press.
Nowadays, a liquid wax is fed directly into the inferior part of a shape made of a stamp and a mobile metallic ring; the shape is closed and the wax cools down until it becomes pasty before it is applied.
Usage of the Great Seal having become obsolete between 1920 and 1946, the recipe for the wax was lost. In 1946, trials had to be made by the Sigillographic service of the National Archives.
Colour
The Ancien Rgime used a green wax for important documents, and a yellow for less important ones.
The Restoration, the July Monarchy and the Third Republic kept the yellow wax, while the First Republic, the Consulate and the Empire used a red wax.
The Constitution of 1946 has taken back the red colour. The Constitution of 1958 and subsequent documents were sealed with yellow wax, until 2002 when the color turned to be green again.
Ribbons
The Empire sealed on wide yellow and blue silk ribbons; the Republic and the Consulate, on a tricolour braid.
The Third Republic used the same red and green ribbon as the Monarchy. Since 1946 (the Fourth and Fifth Republics), a tricolour ribbon is in use.
v d e
Symbols of the French Republic
Marianne Flag of France Ensign of France Emblem of France Great Seal of France
Categories: National symbols of France | Seals (insignia) | Government of FranceHidden categories: Articles lacking sources from February 2008 | All articles lacking sources | Articles containing French language text